Spinning Reels

The new center of gravity (M-Compact Body) means the oscillation gear Is now closer to the rod, Increasing balanced feel. Incororating the Propulsion Line Management system for longer casts and reduced backlash, the Sienna FE series of lightweight yet tough spin reels uses Super Stopper II for instant anti-reverse with no backplay. Available In sizes from 2500 and 4000, the Sienna FG is perfectly suited for everything from freshwater to Inshore saltwater fishing.  Through tens of thousands of casting test sand computer simulations it has been determined that this new AR-C spool lip design provides longer casting distances than a standard spoollip design while preventing backlashes and wind knots from forming. It also allows the line to flow off the spool in smaller loops during the cast. which means less slap on the stripper guide. This means longer casts. Shimano New Zealand provides a TEN YEAR WARRANTY on all Shimano fishing reels, against defects in materials and/or faulty workmanship.  PRODUCT CODE & DESCRIPTION RETRIVE PER CRANK BEARINGS MAX DRAG MONO CAP DRAG TYPE  WEIGHT POWERPRO CAP GEAR RATIO SIENNA 2500 FG 71 cm 1+1 4 kg 3 kg / 180 m FRONT 260 g 10 lbs / 170 yds 5.0:1 SIENNA 4000 FG 82 cm 1+1 8.5 kg 4 kg / 200 m FRONT 335 g 265 lbs / 265 yds 5.2:1

Read more less

Lightweight and extremely sensitive for complete control at any time. VANFORD, the flagship model of the Magnum Light line that aims for lightness and reeling response, is engaged in a variety of activities, such as technical and finesse fishing.  While the powerful winding and longevity of the gear have been further enhanced by the INFINITYXROSS and INFINITYDRIVE, the new model retains the lightweight operation, sensitivity, and comfortable winding feel of the previous generation.  The endurance of the drag has been significantly increased by about ten times as compared to typical products under SHIMANO's standard thanks to the use of DURACROSS, which has exceptional abrasion resistance.  Furthermore, the recently installed ANTITWISTFIN reduces line issues and speeds up user comfort.   Carbon Interfusion4(valence electrons) is a graphite body material that has been reinforced with carbon fibre. Lighter than Magnesium, yet strong enough to cope with the stresses of saltwater fishing.    The rotor's reduced weight opened up new possibilities.  The ability to regulate the lure's initial movement, the sharpness of its action, and the consistency of reeling at will is crucial in sports where agility is crucial.  The lightweight Magnumlite Rotor is part of the Magnumlite line, which concentrates on this.  The initial and still response of reeling is enhanced by completely removing waste and attaining low inertia, which sharpens the angler's perceptions and operability.   The new Vanford, which has a Magnumlite rotor, achieves about 39% less inertia than the 23 Stradic, which has a high-strength plastic rotor.  It clearly shows its benefits while fishing with a lightweight lure that you repeatedly reel in at a very slow speed or when you regularly switch between reeling and pausing. HAGANE Gear is at the very heart of the reel and creates strength and durability. The entire cold-forging process is calculated in minute detail by special 30 design and the result is precision durability. Technical difference between VANFOR  and STRADIC Stradic from the Core Solid series, and Vanford from the Magnumlite series.  Despite the obvious differences in their design goal, they are frequently compared due to their similar price range and lineup.  CI4+ is used for the body and rotor of Vanford from the Magnumlite line, which focuses on lightness and responsiveness.  It performs well in a way that enables you to take advantage of immediate openings and launch technical attacks due to its light weight and low inertia. However, the Stradic from the Core Solid line, which aims for solid reeling, is appealing because to its adaptability, which enables it to easily manage any kind of fishing while concentrating on reeling.  Another popular feature is the aluminum body's rigidity. The Vanford is lightweight, low inertia, and technical, whereas the Stradic is extremely rigid, strong, and adaptable.  Enjoy making the most of each one. ITEM CODE GEAR RATIO DRAG (KG) WEIGHT (G) MONO LINE (MM-M) FLUORO LINE (NO./M) PE LINE (NO.-M) POWER PRO BRAID (LB/YD) RETRIEVE PER CRANK (CM) HANDLE LENGTH (MM) BEARINGS RRP C2000HGA 6 3 155 0.18-215, 0.20-195, 0.25-120 2-120, 2.5-105, 3-85 1-300, 1.2-200, 1.5-140 10-140, 15-115, 20-95 81 45 7-Jan $399.99 2500HGA 5.8 9 175 0.25-160 2-140, 2.5-125, 3-100 1-320, 1.2-270, 1.5-220 10-150, 15-145, 30-100 86 55 7-Jan $419.99 C3000HGA 5.8 9 180 0.25-210, 0.30-130, 0.35-100 2.5-160, 3-130, 4-100 1-400, 1.5-270, 2-200 10-200, 20-140, 40-105 86 55 7-Jan $429.99 4000XGA 6.2 11 215 0.30-180, 0.35-130 3-190, 4-145, 5-115 1-490, 1.5-320, 2-240 15-230, 30-180, 50-120

Read more less

The PENN® Fierce® IV spinning reels come in a variety of sizes, ranging from 1000 to 8000 pounds. The Fierce IV can tackle anything inshore or nearshore thanks to its solid metal body and sideplate, as well as PENN HT-100TM carbon fibre drag washers. Smooth retrieves are ensured by a 4+1 shielded stainless steel ball bearing system, while easy line management is provided by the heavy-duty aluminium bail wire and superline spool. FEATURESUnder severe loads, the full metal body and sideplate maintain exact gear alignment.Smooth retrieves are made possible by the Techno-BalancedTM rotor.4 ball bearings made of stainless steelAnti-reverse bearing in a flashCarbon fibre drag washers HT-100TMBail wire made of heavy-gauge aluminiumLine capacity rings Superline spools

Read more less

Is it time to introduce the young family to fishing? Then there's the new Sweepfire spinning reels, which are hard to beat. You'll feel the incredibly smooth cranking power of Digigear with just one turn of the handle. Perfectly meshed gearing offers tremendous power that will last for years. The ABS spool produces simple casts and maximises distance, while the Twistbuster removes line twist for optimal casting and line control. The Sweepfire is an excellent reel for young or inexperienced anglers. MODEL BALL BEARING DRAG PRESSURE GEAR SPOOL CAPACITY WEIGHT SWEEPFIRE 2500-2B 2BB 2kg 5.3 160m/8lb; 130m/10lb 260g SWEEPFIRE 4000-2B 2BB 4kg 5.3 200m/14lb; 150m/20lb 380g SWEEPFIRE 5000-S2B 2BB 8kg 4.6 300m/17lb; 230m/20lb 625g  

Read more less

The Iconic TWIN POWER SW series Is taken to new heights with the release of the 2021 series. Designed to challenge the Impossible, the Twin Power SW Is stronger and more durable than ever across three models - 8000HG,10000PG and 14000XG. The Inclusion of Infinity Drive reduces handle rotation torque by a maximum of 30% when compared to the previous series. Heat Sink Drag features In the 10000 and 14000 sizes to reduce the amount of heat transferred to the drag washers and line during the fight. The X-Protect seal and labyrinth structure repels water intrusion, with the line roller and clutch assembly, the mechanism Is more than ten times more durable according to Shimano Internal tests. The new striking silver and blue cosmetics have been paired up with a polished metal handle and power knob to finish the reel off superbly. Engineered to the highest standard for the world's hardest fighting saltwater species. These bearings have been through the same process as our A-RB bearings, but feature shields on both sides of the bearings that reduce the possibility of salt or sand inhibiting the bearings rotation.  By supporting the pinion gear on both ends with our S-ARB bearings and integrating a bigger drive gear, Shimano increased the gearing efficiency and power. This results in a fishing reel with ultra- light handle rotation, giving a perfect rotation even under heavy toads.  Shimano New Zealand provides a TEN YEAR WARRANTY on all Shimano fishing reels, against defects in materials and/or faulty workmanship.  HAGANEBody means this reel has a high rigidity and zero twist. The body swiftness and impact resistance virtually eliminates body flexing. The result transforms the anglers actions directly into cranking power. It's efficiency through strength.  HAGANE Gear is at the very heart of the reel and creates strength and durability. The entire cold-forging process is calculated in minute detail by special 30 design and the result is precision durability. From the body design through to the most intricate parts of the drive train including the drive gear worm shaft, worm shaft pin and worm shaft gear, every piece has been carefully reviewed. Consequently, the smallest clearance gaps and wobbles have been eliminated to the highest tolerances. X- Protect is a water resistant technology that combines water repellent treatments and a labyrinth type structure to suppress the entry of water. PRODUCT CODE & DESCRIPTION RETRIVE PER CRANK BEARINGS MAX DRAG DRAG TYPE  WEIGHT GEAR RATIO TPSW8000HGC - Twinpower SWC 8000HG 107 cm 11+1 25 kg Carbon 590 g 5.7:1 TPSW10000PGC - Twinpower SWC 10000PG 102 cm 11+1 25 kg Carbon 635 g 4.9:1 TPSW14000XGC - Twinpower SWC 14000XG 134 cm 11+1 25 kg Carbon 635 g 6.2:1

Read more less

The newly released 2020 Saragosa model Is packed with upgrades to deliver great cranking power and increased durability. The new range Incorporates top tier Shimano technologies such as Infinity Drive, X-Protect, X-Shield, X-Ship, Hagane Body and Hagane gear Into Its lightweight compact body. The newly designed compact body has been engineered to reduce the weight across the entire series, improving the reels handling and balance. The X-Protect water resistance system offers a IPX8 waterproof body and improves the line roller durability. Two new sizes 14000XG and 18000HG complete the line up offering a reel to suit almost every salt water application.  Shimano New Zealand provides a TEN YEAR WARRANTY on all Shimano fishing reels, against defects in materials and/or faulty workmanship. AGANE Gear is at the very heart of the reel and creates strength and durability. The entire cold-forging process is calculated in minute detail by special 30 design and the result is precision durability. PRODUCT CODE & DESCRIPTION RETRIVE PER CRANK BEARINGS MAX DRAG MONO CAP DRAG TYPE  WEIGHT POWERPRO CAP GEAR RATIO SARAGOSA 6000HG-A 104 cm 5+1 10 kg 4 kg / 240 m High Performance Carbon 455 g 30 lbs / 295 yds 5.7:1 SARAGOSA 8000HG-A 106 cm 5+1 13 kg 5 kg / 275 m High Performance Carbon 675 g 40 lbs / 340 yds 5.6:1 SARAGOSA 10000PG-A 101 cm 5+1 15 kg 6 kg / 300 m High Performance Carbon 685 g 50 lbs / 360 yds 4.9:1 SARAGOSA 14000XG-A 134 cm 5+1 15 kg 10 kg / 195 m High Performance Carbon 700 g 50 lbs / 400 yds 6.2:1 SARAGOSA 18000HG-A 129 cm 5+1 20 kg 10 kg / 310 m High Performance Carbon 925 g 50 lbs / 600 yds 5.7:1 SARAGOSA 20000PG-A 104 cm 5+1 20 kg 10 kg / 350 m High Performance Carbon 930 g 65 lbs / 490 yds 4.4:1 SARAGOSA 25000-A 114 cm 5+1 20 kg 10 kg / 420 m High Performance Carbon 960 g 65 lbs / 630 yds 4.4:1

Read more less

Shimano Baitrunner D Series Baitrunner D is the premier series of the famous Baitrunner collection, boasting the best features of previous reels, but combining them with cutting edge spin reel technology. The 8000 and 12000 sizes open up a whole world of possibilities, such as casting and bait fishing for a variety of pelagic game fish, while the 4000 and 6000 sizes cater for those wishing to float a pilchard down a berley trail for snapper. ITEM CODE POWERPRO LINE CAPACITY (#TEST/YD) MAX DRAG (KG) DESCRIPTION BEARINGS GEAR RATIO LINE RETRIEVE PER CRANK (CM) WEIGHT (G) LINE CAPACITY (MM/M) BTR12000D 50/505 12 BAITRUNNER D 12000 3+1 4.4:1 93 850 0.35/500 BTR4000D 15/265 7 BAITRUNNER D 4000 3+1 4.8:1 71 385 0.20/260 BTR6000D 30/245 9 BAITRUNNER D 6000 3+1 4.8:1 89 570 0.30/270 BTR8000D 40/270 9 BAITRUNNER D 8000 3+1 4.8:1 91 615

Read more less

Shimano Baitrunner CI4 Series Built tough for tough saltwater species, the Thunnus CI4+ range consists of four sizes from 4000 to 12000, which covers every inshore to medium offshore application imaginable. After freespooling a bait down to where the target species lurks, the BaitRunner function is engaged. The spool begins to spin as a fish is fooled into accepting the bait under near zero tension; you turn the handle, engage the main drag and… hooked up! TEM CODE POWERPRO LINE CAPACITY (#TEST/YD) MAX DRAG (KG) DESCRIPTION BEARINGS GEAR RATIO LINE RETRIEVE PER CRANK (CM) WEIGHT (G) LINE CAPACITY (MM/M) TU12000CI4F 40/440 12 THUNNUS CI4 12000 6+1 4.4:1 94 785 0.35/500 TU4000CI4F 15/265 7 THUNNUS CI4 4000 6+1 4.8:1 76 360 0.20/260 TU6000CI4F 30/245 10 THUNNUS CI4 6000 6+1 4.8:1 89 510 0.30/270 TU8000CI4F 40/270 10 THUNNUS CI4 8000 6+1 4.8:1 91 550

Read more less

Shimano Baitrunner OC Series The Baitrunner has deep roots in the New Zealand fishing scene, with the freespool principle having been first conceptualised here. The OC features advances like a machined handle, a replaceable spool clicker, Varispeed Oscillation for perfect line lay with Power Pro braid, and Propulsion Line Management for greater distance while casting. The BaitRunner lever moves towards the body to stop any accidental gear changes, and there’s three SA-RB bearings and an anti-reverse bearing. ITEM CODE POWERPRO LINE CAPACITY (#TEST/YD) MAX DRAG (KG) DESCRIPTION BEARINGS GEAR RATIO LINE RETRIEVE PER CRANK (CM) WEIGHT (G) LINE CAPACITY (MM/M) BTROC12000 50/505 12 BAITRUNNER OC 12000 3+1 4.4:1 93 825 0.35/500 BTROC4000 15/265 7 BAITRUNNER OC 4000 3+1 4.8:1 71 380 0.20/260 BTROC6000 30/245 9 BAITRUNNER OC 6000 3+1 4.8:1 89 545 0.30/270 BTROC8000 40/270 9 BAITRUNNER OC 8000 3+1 4.8:1 91 590

Read more less

Baitfeeding spinning reels lend tremendous function to anglers. And this is not just in saltwater fisheries where baitfeeding spinning reels allow live baits to swim uninhibited.  Use of baitfeeders are expanding dramatically in freshwater applications also, in fisheries like trout and catfish, where it’s to the angler’s advantage to ensure fish have a solid hold of baits before setting the hook.  The venerable Okuma Avenger ABF spinning reels have undergone numerous upgrades to form and function in this refined and advanced selection. • On/Off auto trip bait feeding system• Multi-disc, oiled felt drag system• 6BB + 1RB bearing drive system• 1 Quick-Set anti-reverse roller bearing• Precision machine cut brass pinion gear• Corrosion-resistant graphite body• Rigid, diecast aluminum handle design• Precision Elliptical Gearing system• Machined aluminum, 2-tone anodized spool• Corrosion-resistant, stainless steel bail wire• RESII: Computer balanced Rotor Equalizing System Model Gear ratio Bearings Weight(g) Line retrieve(cm) Max Drag Force(kg) Mono. line capacity(mm) ABF-4000 5.0:1 6+1BB 331 79 10 0.25/285, 0.3/190, 0.35/130 ABF-6000 4.5:1 6+1BB 483 80 12 0.30/320, 0.35/225, 0.40/170 ABF-8000 4.5:1 6+1BB 503 87 12 0.40/230, 0.45/180, 0.50/140

Read more less